MaxTech HX-5 Manual de usuario descargar pdf

HX-5

User’s Guide

Section 1 - Introduction

The MaxTech HX-5 is a 5-port ethernet hub compliant with the IEEE 802.3 10Base-T

standard. The five RJ-45 ports connect workstations or other devices together on

a 10Base-T network using unshielded twisted-pair cable. An additional crossover

port connects this hub to a second hub using standard UTP cable for easy net-

work expansion. A full set of LED indicators assist in network troubleshooting.

The package contains the following items:

• Hub • Power adapter

• User’s Guide • Mounting plate and screws

Section 2 - Installation

1. Locating the Hub - Place the hub in a location central to your networked

computers, or within the maximum cable length (328 ft.) to the farthest

computer. It can be placed on a desk or it can be mounted on a wall by using

the included mounting plate and screws.

2. Connecting the Power Adapter - Insert the round end of the power adapter

cord into the hub’s DC Input connector (See Figure 1). Plug the transformer

end of the power adapter into a 120V power outlet. The hub is powered on

when this connection is made.

Note: The hub performs a self-test when it is first powered on. The power and

link LEDs (except port 1) will light. The link LEDs will go off, leaving only the

power LED on.

3. Connecting Workstations - Connect one end of an unshielded twisted-pair

cable into the network connection of a computer. Connect the other end of

Part #MAN065 Rev. 1.0 HUB005

DC INPUT

LINK/TX

POL/RX

54321

COLLISION POWER

Power In

RJ-45

Crossover

Port RJ-45 jacks Ports 1 to 5

Figure 1 - HUB Connectors

12345

CROSSOVER

1 2 3 4

Indice de contenidos

Pagina 1 - User’s Guide

1HX-5User’s GuideSection 1 - IntroductionThe MaxTech HX-5 is a 5-port ethernet hub compliant with the IEEE 802.3 10Base-Tstandard. The five RJ-45 port

Pagina 2 - Section 3 - LED indicators

2the cable into an open port (1 through 5 except the crossover port) on the hub(See Figure 1). The length of the cable must be less than 328 feet (100

Pagina 3 - Appendix A - Specifications

3Appendix A - SpecificationsNetwork Standard: IEEE 802.3 Ethernet 10Base-TTransfer rate: 10 MbpsTopology: StarMax. cable length: 328 ft. (100 meters)P

Pagina 4 - Appendix E - Notices

4paired by an unauthorized center.In the event the product requires service, follow the procedure outlined in Techni-cal Support. When you are instruc

Comentarios a estos manuales

Sin comentarios

MaxTech HX-5 Manual de usuario

Busca en linea o descarga Manual de usuario para Cubos de interfaz MaxTech HX-5. MaxTech HX-5 User's Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales