MaxTech NXP-16 Guía de usuario descargar pdf (Pagina 9)

ning the SETUP program.

3. Follow the Remote Boot Workstation instal-

lation procedure given in your network oper-

ating system manual (i.e. create a Boot

Image on the server for Novell networks, or

start remote booting services on LAN Man-

ager networks, etc.).

Section Three - Driver Installation

The network operating system (i.e. Novell, Win-

dows NT, LAN Manager, etc.) that you are using

requires a driver to access the network adapter

card.

The network adapters are NE-2000 com-

patible and can use the NE-2000 driver supplied

with your network operating system

. Drivers for

most popular network operating systems are in-

cluded on the driver diskette in separate

subdirectories. These drivers can be copied to your

hard-drive by using the INSTALL.EXE program on

the driver disk. Information on using each driver is

available by running HELP.EXE from the root

directory of the driver disk.

Section Four - Troubleshooting

This section describes some of the common prob-

lems you may encounter while using your network

adapter. When troubleshooting, you should make

sure that the network you are connected to is

Align ROM

and socket

notches

Figure 2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

MaxTech NXP-16 Guía de usuario Pagina 9